EU PPWR · for deliveries into the EU As of 17.10.2026

PFAS and heavy metals in packaging

The PPWR does not apply in Switzerland. Here, the Swiss Packaging Ordinance (VerpV) applies from 1 January 2027; its requirements for packaging start in 2030. This page explains the EU rules for deliveries into the EU.

In the EU, limits for heavy metals and a PFAS restriction for packaging in contact with food have applied since 12.08.2026. Here you can read what that means and which evidence you need for deliveries into the EU.

What are PFAS?

PFAS are a large group of artificial chemicals. They are very persistent and are therefore also called “forever chemicals”. They make surfaces water-, grease- and dirt-repellent and accumulate in the environment.

In packaging, they occur mainly in paper and board with a grease- and water-repellent coating.

PFAS restriction for food contact

Packaging with food contact may contain PFAS only below these limits:

ParameterLimit value
Individual PFAS (targeted analysis, excluding polymeric PFAS)25 ng/g
Sum of PFAS (targeted analysis, excluding polymeric PFAS)250 ng/g
Total PFAS (including polymeric PFAS)50 mg/kg

ng/g means nanograms per gram (ppb), mg/kg means milligrams per kilogram (ppm). If the total fluorine content exceeds 50 mg/kg, the manufacturer must demonstrate on request how much of the fluorine is present as PFAS or non-PFAS. Source: Article 5(5) of Regulation (EU) 2025/40, applicable from 12.08.2026. Status as of 17.10.2026.

Heavy metals

A sum limit applies to heavy metals:

SubstancesLimit value
Lead, cadmium, mercury and hexavalent chromiumSum of no more than 100 mg/kg in the packaging or its components

Source: Article 5(4) of Regulation (EU) 2025/40. In Switzerland, the same total limit of 100 mg/kg applies to packaging under the Chemical Risk Reduction Ordinance (ChemRRV, Annex 2.16).

Which packaging is affected?

The PFAS restriction affects packaging that comes into contact with food. The heavy metal limit applies to all packaging.

PE and PP films are normally used without a PFAS coating. However, processing aids used in production can occur. That is why evidence counts, not assumptions.

This is the evidence you need

  • laboratory test report on PFAS for packaging with food contact
  • declaration or test report from the supplier on heavy metals
  • the manufacturer's EU declaration of conformity

For our products, you can find the evidence in the PPWR data sheets.

As of 16.11.2026. Information without guarantee, not legal advice. Binding are Regulation (EU) 2025/40 and, for Switzerland, the VerpV (SR 814.621).

Frequently asked questions

Questions and answers

Are PE bags automatically PFAS-free?

No, this cannot be said across the board. PE is normally used without a PFAS coating, but processing aids can occur. Rely on the supplier's evidence.

Does the PFAS limit also apply to packaging without food contact?

The restriction affects packaging with food contact. The heavy metal limit, by contrast, applies to all packaging.

What does ng/g mean?

Nanograms per gram. This corresponds to one part per billion (ppb).

Sources

Legal basis Switzerland and EU