EU PPWR · for deliveries into the EU
EU PPWR: what applies when 2026 to 2040
The PPWR (Packaging and Packaging Waste Regulation, Regulation (EU) 2025/40) is the EU packaging regulation. It applies directly in all EU member states; its first stage has applied since 12.08.2026. It does not apply in Switzerland.
It matters to you if you deliver packaging or packaged goods into the EU. It requires manufacturers to prove conformity, limits heavy metals and PFAS and, from 2030 at the earliest, requires recyclability, recycled content and less empty space.
-
12.08.2026Applies in the EU
The EU PPWR becomes applicable
From this day, the regulation applies directly in all EU member states. For deliveries into the EU, the following now applies:
- Manufacturers: issue the EU declaration of conformity and keep technical documentation
- Heavy metals: limit for the sum of lead, cadmium, mercury and chromium VI
- PFAS: restriction for packaging in contact with food
- Importers established in the EU: ensure before placing on the market that the evidence exists; distributors: check with due care
Legal basis: Regulation (EU) 2025/40, in particular Art. 5 (substances)
Open our PPWR data sheets -
from 12.08.2028
Harmonised labelling
Packaging will carry uniform information on material composition so that consumers can separate waste correctly. The exact date depends on implementing acts of the Commission; the obligation applies from this date at the earliest.
Legal basis: Art. 12
-
from 01.01.2030
Recyclability, recycled content, empty space
Three requirements apply:
- Recyclability: Packaging must be designed to be recyclable and classified into a performance grade A, B or C. Anyone who does not reach at least grade C may no longer place the packaging on the market.
- Recycled content: Plastic packaging must contain minimum shares of recycled content, roughly 10 to 35 percent depending on the packaging type.
- Empty space: For grouped, transport and e-commerce packaging, the empty space may be at most 50 percent.
The European Commission sets out the details in delegated acts. For recyclability and empty space, the following applies: from 2030, or only once the relevant acts have been in force for 24 months or three years respectively, whichever is later.
Legal basis: Art. 6 (recyclability), Art. 7 (recycled content), Art. 24 (empty space)
Mono-material or composite: the recycling reality -
from 01.01.2038
Only the best grades remain
Only packaging of grades A and B is then permitted.
Legal basis: Art. 6
-
from 01.01.2040
Higher recycled content quotas
The minimum shares of recycled content rise significantly for plastic packaging, to roughly 25 to 65 percent depending on the packaging type.
Legal basis: Art. 7
As of 16.11.2026. Many details will only be set by delegated acts of the European Commission. Information without guarantee, not legal advice.
Who is affected
What is your role?
In Switzerland, the Packaging Ordinance (VerpV) applies from 1 January 2027; most obligations start in 2030 and 2031. If you deliver into the EU, the EU PPWR also applies.
| Role | What applies to you | What you do now | More |
|---|---|---|---|
| Producer or importer (CH) | From 2030, basic requirements for filled packaging; from 2031, take-back of single-use plastic packaging and reporting of quantities to the FOEN – only above CHF 1 million turnover and 500 kg of packaging. | Record packaging quantities by material and check packaging for recyclable mono-material options. | Obligations under the VerpV |
| Retailer (CH) | From 2030, basic requirements if you hand over filled packaging; from 2031, take-back of single-use plastic packaging above the thresholds. | Ask suppliers about material, recycled content and recyclability. | Obligations under the VerpV |
| Delivery into the EU | EU PPWR since 12.08.2026: as manufacturer, EU declaration of conformity and technical documentation; as supplier, information to the manufacturer. The importer is your customer established in the EU. | Clarify with your EU customer who is manufacturer and who is importer, and provide the evidence. | Declaration of conformity |
| Private individual | No obligations under the VerpV or the PPWR. | Nothing. The traffic light on our products shows you the status under the EU PPWR. | EU PPWR-compliant packaging |
Information without guarantee, not legal advice. Binding are the VerpV (SR 814.621) and Regulation (EU) 2025/40.
The short answer
What applies in Switzerland?
The EU packaging regulation PPWR does not apply in Switzerland. What counts is the Swiss Packaging Ordinance (VerpV, SR 814.621), adopted by the Federal Council on 24 June 2026. It enters into force on 1 January 2027 and replaces the Beverage Packaging Ordinance.
Its main obligations start later: basic requirements for packaging from 2030, take-back of single-use plastic packaging and reporting of quantities to the FOEN from 2031, a recovery rate from 2032. If you deliver packaging or packaged goods into the EU, the PPWR (Regulation (EU) 2025/40) has applied there since 12 August 2026. That is covered further below.
- 1.1.2027The Swiss Packaging Ordinance (VerpV) enters into force.
- 2030Basic requirements: minimum size, recyclable, as much recycled content as possible.
- 2031Take-back of plastic packaging and reporting to the FOEN, above thresholds.
- EUFor deliveries into the EU, the PPWR has applied since 12.08.2026.
All topics
From obligation to the right packaging
Frequently asked questions
Swiss packaging law and the EU PPWR: questions and answers
Does the EU packaging regulation PPWR apply in Switzerland?
No. The PPWR (Regulation (EU) 2025/40) is EU law and does not apply in Switzerland. For the Swiss market, the Packaging Ordinance (VerpV) applies from 1 January 2027. Anyone delivering packaging or packaged goods into the EU must, however, comply with the PPWR; the FOEN explanatory report says so as well.
When does the Swiss Packaging Ordinance (VerpV) apply?
The VerpV enters into force on 1 January 2027. Some obligations apply later: the advance disposal fee on glass packaging from 1.1.2028, the basic requirements for packaging (Art. 3) from 1.1.2030, the take-back obligation for single-use plastic packaging (Art. 4) and reporting of quantities to the FOEN (Art. 22) from 1.1.2031, the recovery rates (Art. 7) from 1.1.2032.
What does the VerpV require of companies?
From 2030, retailers and producers that hand over packaging filled with goods ensure, as far as technically possible and economically viable, that the packaging is limited to the necessary minimum, is suitable for collection and recycling, contains as much recycled material as possible and no substances of very high concern. From 2031, single-use plastic packaging is also subject to a take-back obligation and reporting of quantities to the FOEN. Both apply only to companies that exceed CHF 1 million turnover and 500 kg of packaging in two consecutive financial years. Anyone importing goods for commercial supply also counts as a producer.
What does the PPWR traffic light on the product pages show?
The traffic light shows the status under the EU packaging regulation PPWR. It matters if you deliver the packaging into the EU; it is not a check under Swiss law. Green: the EU requirements currently in force are met. Yellow: compliant today, but an upcoming stage, for example 2030, is not yet met. Red: currently not compliant, we recommend an alternative.
Are mono-PE bags compliant with the EU PPWR?
Packaging made from a single material, such as PE, has good prerequisites for recycling. However, the classification under the delegated acts of the European Commission and the declaration of conformity of the respective product are binding. To check, look at the traffic light and the data sheet on the product.
Does the PPWR apply in Liechtenstein?
Liechtenstein is part of the EEA. The PPWR is marked as EEA-relevant; a decision to incorporate it into the EEA Agreement was not known to us at the editorial deadline (16.11.2026). Under the customs treaty, Swiss environmental law also applies in Liechtenstein; according to the official publication (as of 30.06.2026), this is still the previous Beverage Packaging Ordinance. Whether and from when the new VerpV applies in Liechtenstein has not yet been published. Liechtenstein also has its own ordinance on packaging and packaging waste.
What is my role under the VerpV and the PPWR?
Under the Swiss VerpV, a producer is anyone who manufactures products or imports them for commercial supply; a retailer is anyone who buys in Switzerland and supplies commercially. Under the EU PPWR, a Swiss company delivering into the EU is not an importer: the importer is the customer established in the EU. The Swiss company is the manufacturer if it places the packaging on the market under its own name or brand, otherwise a supplier. Private households have no obligations.
Sources
Legal bases and authorities
- Swiss Packaging Ordinance (VerpV, SR 814.621) on fedlex (German)Binding Swiss ordinance text (AS 2026 358)
- Federal Council: press release on the Packaging Ordinance (24 June 2026, German)Federal Council position with the FOEN explanatory report
- Regulation (EU) 2025/40 in the Official Journal (EUR-Lex)Binding text of the EU PPWR
This page provides general information and does not replace legal advice. Binding are the Swiss Packaging Ordinance (VerpV, SR 814.621) and Regulation (EU) 2025/40 with its implementing acts. As of 16.11.2026.
