-
Regular price From CHF 26.12Regular price
Sale price From CHF 26.12 -
Regular price From CHF 25.99Regular price
Sale price From CHF 25.99 -
Regular price From CHF 26.75Regular price
Sale price From CHF 26.75
Guide Tubular film
What is tubular film?
At a glance:
- LDPE 50 / 100 microns
- rLDPE 50 microns
- Width 50–700 mm
- Roll of 125–500 running metres
Tubular film is a seamless plastic film in tube form. It is supplied extruded closed on two sides – you only need to seal the top and bottom to obtain a finished bag.
The standard material is LDPE (low-density polyethylene) – flexible, tear-resistant, recyclable. On request also in HDPE, recycled LDPE (GRS-certified) or food-grade to EU 10/2011. More in the PE tube guide.
What is tubular film used for?
- Your own bag production: unroll, cut, seal – done
- Machine processing: for packaging machines on a roll
- Industry: protective film for semi-finished products, machine parts
- Box liners: moisture protection for shipping
- Corrosion protection: metal parts against moisture
- Food: vacuum packing, bakery liners, take-away
- Collective packaging: bundling small parts
Which tubular film variants are there?
- Transparent tubular film – crystal-clear, visible contents
- Extra strong tubular film – from 100 microns for heavy contents
- Food-grade tubular film – EU 10/2011 certified
- Tubular film on a roll – for machine processing
- Cut-to-size tubular film – dimensions to your specifications
Advantages of tubular film
- Your own bag production: any size you want can be made in-house.
- Cost-efficient at large quantities.
- Available food-grade to EU 10/2011.
- Various thicknesses: 50 and 100 microns depending on the application.
- Machine-compatible: 76 mm inner core standard, special sizes possible.
- Recyclable: LDPE single-type in the recycling collection.
- Sustainable options: made of recycled LDPE (GRS).
- Fast shipping from our warehouse.
Material properties of tubular films in detail
Tubular films are endless PE tubes on a roll that are individually cut and closed into bags. The material thickness and film type determine the application area and processability.
LDPE 50 microns — standard transparent variant
Low-density polyethylene, flexible, clear, cost-efficient. The standard for light packaging: textiles, shipping packing, protective storage bags. Up to approx. 1 kg fill weight.
LDPE 100 microns — extra strong
Reinforced material thickness for heavy or sharp-edged contents: tools, metal parts, industrial goods. Higher puncture and tear resistance. The standard for commercial shipping and storage applications.
HDPE — vest-bag look
High-density polyethylene film with a crisp look and high tear resistance at a low material thickness. Suitable for light packaging with high puncture resistance.
Food-grade variant
LDPE tubular films certified to EU 10/2011 for direct food contact. Declaration of conformity on request. Suitable for baked goods, fruit, vegetables and fresh food packing.
Application workflow
Tubular film is cut to the desired length at the end and closed by heat sealing. This makes content-specific bag sizes possible without keeping various bag formats in stock.
Material comparison at a glance
| Variant | Material | Thickness / property | Typical application |
|---|---|---|---|
| Standard | LDPE | 50 microns, clear, up to approx. 1 kg | Textiles, shipping, protective bags |
| Extra strong | LDPE | 100 microns, puncture-resistant | Tools, metal, commercial shipping |
Individual customisation — film thickness, width and packing
Tubular films are produced in almost any widths and material thicknesses — the most flexible film packing in the range.
Material thickness
From stock 50 and 100 microns LDPE; other film thicknesses as a custom-made product on request. Choice according to contents: light textiles 50 microns, medium-heavy industrial goods 100 microns, sharp-edged or very heavy: stronger film as a custom-made product on request.
Tube width
Tube widths from 50 mm to 1’500 mm possible. Standard roll length 100–500 m, depending on material thickness and roll diameter. For machine packing with a length stop we supply to specification.
Printing
Printing in flexo printing with up to 6 colours is possible, but rarely required in practice, as tubular film is mostly used unprinted for internal packing.
Minimum order quantity
Minimum quantity and delivery time on request. Send an enquiry.
Sustainability — tubular films and PE recycling
Tubular films made of pure LDPE are mono-material and fully recyclable in the PE stream.
Mono-PE recycling
Pure LDPE tubular film is classified as polyethylene by near-infrared detection (NIR) in German sorting plants and fed into the PE recycling stream. For commercial use, collection via a film collection system (e.g. Interzero, Reclay).
Recyclate tubular film
On request we process post-consumer recyclate with shares of 30–80 %. Recyclate tubular film is cost-efficient and ecologically advantageous, but not approved for food contact.
PPWR and recyclability
Tubular films are mono-material PE – readily recyclable by today's standards. The PPWR recyclability grades apply from 2030 at the earliest (delegated act still pending). Advice on recycling-friendly printing inks on request. In Switzerland, the Packaging Ordinance (VerpV) applies instead of the PPWR: it enters into force on 1.1.2027, and its requirements for packaging start in 2030.
Material efficiency through optimal dimensioning
Tubular film is material-efficient, as the bag length can be cut precisely to the contents — no standardised bag size with material loss at partial filling. Advice on optimal dimensioning on request.
Shipping & delivery
Film rolls are shipped by the pallet or individually from our warehouse. For special sizes, the delivery time is agreed individually. Free shipping to Switzerland and Liechtenstein on orders over CHF 250 net.
Popular tubular film variants
Packaging films overview & related topics
Frequently asked questions about tubular film
What is tubular film?
Tubular film is a seamless plastic film in tube form, produced by blown extrusion. Already closed on its two long sides – you only seal the top and bottom and you have a bag. Synonyms: PE tube, film tube, LDPE tubular film.
How is tubular film produced?
By the blown film process: PE granulate is melted at 180–220 °C, pressed through a ring die and inflated from the inside with air. The cooled film bubble is laid flat and wound onto a roll.
Which inner core does the roll have?
The standard is a 76 mm cardboard core. For special machines we supply other inner core diameters on request.
Which widths and lengths are available?
Width (laid flat) typically 100–800 mm, special sizes up to 1’500 mm. Length 200–1’000 m depending on the thickness. Order the exact variant you need → tubular film on a roll or cut to size.
Which thicknesses are there?
50 microns (light to medium), 100 microns (heavy) → extra strong. Also thinner (25 microns) or thicker (250+ microns) as custom production.
Is tubular film food-grade?
The standard is yes – certified to EU 10/2011 with a declaration of conformity. → food-grade variant. LFGB conformity on request.
How do I seal tubular film myself?
With a film sealing machine (impulse or bar sealer). Match the temperature and sealing time to the thickness – the exact time is best determined with a sample. A detailed guide in the film bag guide.
Tubular film vs. flat film – what is the difference?
Tubular film is seamlessly closed on its two long sides; flat film is an open web without a longitudinal seam. For bag production, tubular film is more efficient – only 2 instead of 3 seal seams are needed.
Can tubular film be vacuum-sealed?
Standard tubular film is not suitable for vacuum (too smooth). For vacuum applications you need structured vacuum film – as custom production.
Is tubular film freezer-suitable?
Yes – LDPE stays flexible down to approx. −50 °C. For frequent freeze-thaw cycles the 100-micron film is recommended.
Is HDPE tubular film possible?
Yes – on request we supply HDPE tube for special applications with higher tear resistance per wall thickness.
Available with an aluminum laminate?
Pure tubular film is single-type PE. For aroma or UV protection we offer aluminum-laminated composite films as custom production – typical for coffee, tea, spices.
How many bags do I get from one roll?
Example: 200 mm width, 50 microns, 500 m roll, 30 cm bag length → approx. 1’665 bags per roll.
Delivery time and minimum quantity?
Standard tubular film is available from our warehouse – fast shipping. Custom production is made individually; delivery time and minimum quantity on request.
Your question isn't listed? More questions? Contact us
- Shipped from stock
- For businesses and private customers – volume pricing in the shop
- PPWR status shown for every product
- Personal advice on material and size


